GILERARUNNER.8m.com

SERVICING TUNINGDE-RESTRICTINGMY RUNNERGALLERYTECH.SPECLINKSHISTORYPRICESNEWSFEATURES
PRODUCTSLIGHTER SIDENEW RUNNER

Here you will find the full specification of all the Runner models.  

Scroll down for all models.

FX/SP 125     FXR/SP180     Malossi 172 

Cycle:Otto 2 stroke

Bore:55mm 65.6mm  - - - - - -

Displacement:123.5cc  175.8cc  172.5cc

Stroke:52mm

Compression ratio:9.9:1  9.8:1  11:1

Fuel:Unleaded, 95 octane minimum   Super unleaded, 98 octane minimum

Max power:15bhp at 7,500rpm  21bhp at 8,000rpm  22bhp at 7,500rpm

Max torque:14kgm at 7,000rpm  19kgm at 7,000rpm  - - - - - 

Max speed:104kmh  120kmh/70mph  80mph  80+mph est.(125 gearing)  90+mph est.(180 gearing)

Acceleration 0-30m:4.2 seconds  3.8 seconds  3.0 seconds est(125 gearing)

Acceleration 0-60m:6.1 seconds  5.4 seconds  4.9 seconds est(125 gearing)

Power to weight ratio:130.4bhp per tonne  182.6bhp per tonne  209.5bhp per tonne

Lubrication:Separate with automatic mixer, flow regulated by engine rpm and gas valve

Cooling:Liquid

Gears:Automatic CVT variator with torque server

Clutch:Dry centrifugal

Induction:Lamellar valve in crankcase

Ignition:Electronic capacitive (CDI) and variable advance

Starter:Electric(Bendix) and kick starter

Carburettor:Dell'orto PHVB 20.5

Choke tube diameter:12mm

Battery capacity:12 ah

Electrical system:12 volt

Final transmission:Gears in wheel hub 12/32x12/42   13/31x12/42

Chassis:Cradled in welded steel tubes with pressed steel reinforements 

Front suspension:Telescopic upside-down forks(Dia. 30mm) with hydraulic shock absorber

Rear suspension:Single arm with double effect hydraulic shock absorber and helicoidal spring(adjustable for pre-load)

Front brake:Stainless steel 220mm disc with twin hydraulic floating pistons

Rear brake:Stainless steel 240mm disc with hydraulic double opposed pistons

Front wheel:Die-cast alloy, 3.50x12 inch

Rear wheel:Die-cast alloy, 3.50x13 inch

Front tyre:Tubless 120/70-12

Rear tyre:Tubless 130/60-13

Fuel tank capacity:12 ltr

Oil tank capacity:1.8 ltr

Consumption(ECE cycle):25km/l

Lenght:1,780mm

Width:720mm

Wheel base:1,303mm

Seat hight:815mm

Dry weight:115kg 100kg

VX125    VXR180   VXR200

Engine:Single cylinder LEADER 4-stroke.

Bore:57mm    69mm   72MM

Displacement:124cc    182cc   198CC

Stroke:48.6mm

Compression ratio: 12.5:1

Fuel:Unleaded

Distribution:SOHC

Max. power:15bhp at 9,700rpm   20bhp at 8,500rpm   21bhp at 8.500rpm

Max torque: N/A

Max. speed:102kmh   117kmh    122kmh/68mph  76mph   79mph

Acceleration 0-30m: N/A

Acceleration 0-60m: N/A

Lubrication:Wet sump(1litre lubricant volume)                               

Cooling:Liquid

Gearbox:CVT automatic variable advance with torque server

Clutch:Automatic dry certrifugal

Induction: N/A

Ignition:Electric CDI, with variable advance

Start:Electric with valve lifter and torque limiter

Carburettor:Walbro

Choke tube diameter:N/A

Battery capacity:12 ah

Electrical system:12 volt

Final transmission:10.35 15/46x13/44     9.2 15/46x14/42   N/A

Chassis:Cradled in welded steel tubes with pressed steel reinforements 

Front suspension:35mm Dia. hydraulic telescopic fork

Rear suspension:Two dual affect shock absorbers and adjustable helicodial spring

Front brake:220mm Dia. stainless steel disc, floating caliper with two pistons

Rear brake:220mm Dia. stainless steel disc, caliper with two opposed pistons

Front wheel rim:3.50x12 inch pressure die cast aluminium alloy

Rear wheel rim:3.50x12 inch pressure die cast aluminium alloy

Front tyre:Tubeless 120/70-12

Rear tyre:Tubeless 130/70-12

Fuel tank capacity:12 ltr

Consuption on ECE cycle:28km per litre   27km per litre    24km per litre

Lenght:1,900mm

Width:750mm

Wheel base:1,340mm

Seat hight:820mm  

Dry weight:119kg  

SP50:

Engine:Single cylinder 2 stroke

Displacement:49,3 cc

Bore:40 mm

Stroke:39,3 mm

Fuel:Unleaded

Induction:VReed valve in crankcase

Injection:Electronic CDI

Start:Electric and kick starter

Lubrication:Separate with automatic mixer

Cooling:Liquid

Gear change:Automatic CVT with torque server

Clutch:Automatic centrifuge type

Frame:Cradled in welded steel tubes with pressed steel reinforcements

Front suspension:Fork with upside down shafts with double effect hydraulic damper

Rear suspension:Hydraulic single damper, co-axial helicoidal spring

Front brake:Hydraulic with Ø 220 mm stainless steel disc

Rear brake:Hydraulic with Ø 175 mm stainless steel disc

Front wheel rim:Die-cast aluminium alloy 3.50x12"

Rear wheel rim:Die-cast aluminium alloy 3.50x12"

Front tyre:Tubeless 120/70-12"

Rear tyre:Tubeless 120/70-12"

Length:1.830 mm

Width:715 mm

Wheelbase:1.290 mm

Saddle height:815 mm

Dry weight:89 kg

Fuel tank capacity:12 litres

Oil tank capacity:1,4 litres

Max. speed:30 mph, restricted.   55+ mph. de-restricted

Emissions:The catalyzed version respects the European Multidirective 97/24 EC chapter 5 (Euro1)

paul_loughnane@e-merge.ie